AllMotion: Stepper Starter Kits EZHR23ENHCSK
使你的电机在半小时内即可运行!
EZHR23ENHCSK入门套件结合了EZHR23ENHC(7安培40V)步进电机控制器+驱动器,RS485转换器以及首次使用者所需的所有电缆,使其步进电机在不到半小时内运行。 用户只需提供电源,步进电机和PC。
EZStepper接线图的第二页显示了如何连接EZHR23步进电机控制器+驱动器。
连接电机后,将RS-485转换器连接到PC上的COM端口,即可开始运行电机。 请参阅网站上提供的EZ入门文档。
套件包括:
一个EZHR23ENHC步进电机控制器+驱动板。
一个RS485转换器。
一个预接线光电断路器,用作home标志。
所有电缆
请从网站下载最新的文档和软件。
Everything to get your Motor running within half an hour!
The EZHR23ENHCSK Starter Kit combines an EZHR23ENHC (7 Amp 40V) Stepper Motor Controller + Driver, an RS485 Converter, and all cables required for the first time user to get their Stepper Motor moving in less than half an hour. The user needs to provide only a power supply, stepper motor, and a PC.
Once your motor is connected, connect the RS-485 Converter to your COM port on your PC and you'll be ready to start moving your motor. Please refer to the EZ Start Document available on the website.
One EZHR23ENHC Stepper Motor Controller + Driver Board.
One RS485 Converter.
One Pre-Wired Opto Interrupter, for use as a home flag.
All Cables
Please download most current documentation and software from the Website.