AllMotion: Servo Starter Kits (EZSV23SK Series)
伺服启动套件(EZSV23SK 系列)
使你的直流无刷或直流有刷电机在半小时内运行!
EZSV23SK入门套件结合了一个EZSV23(5安培40V)无刷直流,(或有刷直流)电机控制器+驱动器,RS485转换器,以及首次使用者所需的所有电缆,以使其伺服电机运动。用户只需要提供电源,电机和PC。存储在控制器中的默认PID值非常强大,适用于直径为2“或更小的大多数电机。相同的控制器将连接到有刷或无刷电机(参见接线图)。
网站上提供的EZ Start Document描述了如何连接霍尔传感器并使霍尔传感器和编码器的相位正确的步骤程序。
EZServo接线图精确显示了如何连接EZSV23伺服电机控制器+驱动器。
套件包括:
一个EZSV23电机驱动板。
一个RS485转换器。
所有电缆。
请从网站下载最新的文档和软件。
Everything to get your BLDC or Brush DC Motor running within half an hour!
The EZSV23SK Starter Kit combines one EZSV23 (5 Amp 40V) Brushless DC, (or Brush DC) Motor Controller + Driver, an RS485 Converter, and all cables required for the first time user to get their Servo Motor moving. The user needs to supply only a power supply, a motor, and a PC. The default PID values stored in the Controller are robust and will work with most motors that are 2" or less in diameter.
The same controller will wire to either Brush or Brushless Motors (See Wiring Diagram).
The EZ Start Document available on the website describes a step by step procedure explaining how to wire the hall sensors and get the phasing of the hall sensors and encoder correct.